| No. |
1 |
2 |
3 |
| Image |
 |
 |
 |
| Name |
EUP Pump |
VCI Anti-rust Bag |
Oil Absorbing Paper |
| Description |
EUP pump part number: 0414693007 |
Prevent EUP pump from rusting |
Protect the unit pump from leakage |
| No. |
4 |
5 |
6 |
| Image |
 |
/ |
/ |
| Name |
EUP Pump Packing Box |
/ |
/ |
| Description |
Place EUP pump and EUP pump accessories |
/ |
/ |
2. 0414693007 EUP Pump Installation Precautions
- The replacement of the EUP pump must strictly follow the electrical system, the approved pressure of the low-pressure fuel intake system, the approved pressure of the high-pressure fuel circuit system, and fuel system replacement consumables requirements (including the low-pressure fuel circuit system filter and the high-pressure fuel circuit) specified in the vehicle engine maintenance manual,
- Replacement of wearing parts of the fuel system, cleaning requirements for the connection between the fuel system and the injector, the fitting clearance of the EUP pump connection, the installation angle and tightening torque of the injector, the fitting clearance of the intake system, and the fitting clearance of the exhaust systemto ensure the service life of the engine and the normal operation of the injector.
- When installing the EUP pump on the engine, it is necessary to clean the engine block, cylinder head and other parts connected to the EUP pump, and ensure that there is no dust, carbon deposits, water, rust spots, etc.
- When installing the EUP pump, apply lubricant between the EUP pump, sealing gasket and O-ring.
- When installing the EUP pump on the engine, please carefully check the components related to the installation of the EUP pump, such as the EUP pump pressure plate, screw, EUP pump rod and other accessories are not deformed, and install it in strict accordance with the operation steps of the engine maintenance manual.
- It is forbidden to operate the bare EUP pump for a long time in an environment with serious dust pollution and corrosion to iron products.
- It is forbidden to operate the bare EUP pump for a long time in a strong magnetic field environment.
3. 0414693007 EUP Pump Storage Standard
- Choose a Suitable Storage Place
The warehouse and cargo yard where the EUP pump is stored should be kept clean and dry, and away from the factory buildings that generate harmful gases and dust; do not mix with acids, alkalis, salts and other substances; the storage place should have a good drainage system; the cargo yard should be flattened with gravel or furnace ash etc. to enhance the water permeability of the surface layer to keep the reservoir area dry.
- Strict Requirements of Warehousing
Strict inspections should be carried out when the EUP pumps are put into storage, the surface cleaning work should be done well to remove water traces, oil stains, ash and other dirt, remove the rust and do anti-rust treatment in time. Packaged injectors must be protected from damage.
- Keep The Warehouse Dry And Preventing Moisture
The relative humidity is usually below 70% for the EUP pumps placed in the room, and the corrosion of the EUP pumps is significantly reduced.
EUP pump s must be stored in the warehouse, and they are forbidden to store in the same warehouse with commodities with high water content.
After the EUP pump is exposed to rain, the corrosion rate will increase significantly. The purpose of sealing is to isolate the EUP pump from rainwater and humid air, so the warehouse window should be checked in time to avoid rainwater entering the warehouse
If the EUP pump package is damaged, it should be repaired or replaced; when the package is damp, the packaging material should be dried; if the original anti-corrosion and oil applied at the factory is found to be damaged or dried up, it should be cleaned and re-applied oil in time.
- It is forbidden to leave the EUP pump exposed in the air for a long time.
- It is forbidden to store acid, alkali, salt and other substances together with the EUP pump.
- The unpacked EUP pump must be rust-proof during secondary storage.
The content on “0414693007 EUP Pump 0414 Series Encyclopedia” may be used as a resource while accessing this website. Any other use, including the reproduction, modification, distribution, transmission, republication, display, or performance, of the content on this site is strictly prohibited without the express written permission of www.euppump.com. Unauthorized use of any copyrighted material on the website may constitute a violation of the copyright laws. User accounts may be disabled or terminated if they are found to be repeat infringers.
If you require any more information or have any questions, please feel free to contact us at hison@shumatt.com.
